Start a new topic

Hifimediy Sabre COAX/OPTICAL DAC. ES9023 + CS8416 115V

Hifimediy Sabre COAX/OPTICAL DAC. ES9023 + CS8416 115V

Hello and thank you in advance,



http://hifimediy.com/index.php?route=product/product&path=62&product_id=85



I bought the unit above. A few questions:

1. I have toslink from my CD player I also have RCA from my cd player, I assume I may connect either one to the dac, but if I use toslink, which optical input or does it not matter?

2. On the output, one is pot controlled the other "direct" - if I am to connect these to RCA out to an amp, are both intended to be connected? I assume not, if not, how woudl I solder one connectors Red Wh Blk to a set of RCA?



Or maybe I should just ask what is the best way to get the signal to my amp which is 200kohms?



Thank you for my newbie questions?
Hi!
It does not matter which input you use, simply chose one.
About the output, you should only one at a time. You can solder one pair of RCA to each output (using totally two pairs of RCA) and then chose which one you want to use when connecting it to an amplifier or headphones.
Connect the output cables to RCA plugs like this:
http://forum.hifimediy.com/attachment.php?attachmentid=9&d=1328429190

If you have a volume control on your amp, then use the output on dac without volume control.
Thank you very clear ... One more question if I may? if I were to remove the AC trafo what voltage must be supplied?
Thank you very clear ... One more question if I may? if I were to remove the AC trafo what voltage must be supplied?

Hi, dual 6VAC.
Login or Signup to post a comment