Start a new topic

Shared supply for T1 (without volume pot) and crossover network

Shared supply for T1 (without volume pot) and crossover network

Hi, this is hard to say for sure without trying. Several T1 can share one smps300r, but I can't guarantee that something will not interfere and cause noise in your case.
I would like to use a single DC power supply (24V x 5A) to power both the T1 board and a crossover filter

(splitting the voltage to +/- 12V DC needed for the filter opamps).

Will it work OK, or the T1 amp require a totally independent supply, like some class-D amplifiers?

Thank you.
Login or Signup to post a comment