Start a new topic

Shared supply for T1 (without volume pot) and crossover network

Shared supply for T1 (without volume pot) and crossover network

I would like to use a single DC power supply (24V x 5A) to power both the T1 board and a crossover filter

(splitting the voltage to +/- 12V DC needed for the filter opamps).

Will it work OK, or the T1 amp require a totally independent supply, like some class-D amplifiers?

Thank you.
Hi, this is hard to say for sure without trying. Several T1 can share one smps300r, but I can't guarantee that something will not interfere and cause noise in your case.
Login or Signup to post a comment