The input caps might also be there to avoid DC out from the amp, so you should be certain about that. You could remove or short the pot on the cMoy. Note that the input impedance might change if you remove the pot. Regards
over 6 years ago
I would like to know what you think about using UAE23+ with a cMoy (a47 version) amplifier.
I'd like to know your opinion on removing the input capacitor from the cMoy, as the Sabre chip does not need that. Also if it's a wise decision to use the DAC's volume control, so the other pot can be removed from the cMoy as well..