Start a new topic

Power supplies for 2x T4

Power supplies for 2x T4

Could I use two 35 + 35 300VA Toroidal Transformers?
Yes it might be suitable, however they don't state any technical info, what voltage it outputs. T4 needs a single DC voltage. Also, the T4 has psu buffer caps which could make the smps go into current limitation mode. They call it "hiccup mode". This could possibly make the amp not turn on. Hard to say without further knowledge. This was an issue with earlier production of Connexelectronic smps500r, but they increase the limit for when the limitation occours in later productions.
I am interested in an alternate power supply to the Connexelectronic SMPS800RS/E to power two T4s. I am limited by the room left in my case to a power supply of 110mm x 150mm. Is something like this suitable? http://www.hypex.nl/product/2012-11-23-13-42-14/smps1200.html
Login or Signup to post a comment